THE invention of
COMBINED 3pH SYSTEM
THE REVOLUTION
IN THE WORLD OF DETAILING
What is the #Labocosmetica
combined 3pH car wash cycle?
In washing, every meticulous cleaning action is
essential.
Often, however, to remove the dirt and contamination
that has settled on the bodywork, you need a product
with a specific pH.
With the use of the combined pH washing cycle of
#Labocosmetica we will obtain the following advantages:
ACIDIC PH
With an Acid pH we will
remove all residues of
inorganic origin such as
limestone, water stains, acid
rain residues;
NEUTRAL PH
With a neutral pH we will remove
static dirt during the mechanical
action
ALKALINE PH
With an Alkaline pH we will remove all residues of organic origin such as road dirt, oil, midges and organic residues
The 3pH combined system by #Labocosmetica
is divided into these macro-categories:
DECONTAMINATION -
MAINTENANCE -
PROTECTION
WHEELS AND TYRES
ENGINE
CAR WASH DECONTAMINATION-MAINTENANCE-PROTECTION
“Contaminants can reduce protection or even make you think
that previously applied protection has disappeared.”
The combined 3pH washing system by
#Labocosmetica, thanks to the different pH of the
products used, frees the protective agent present on
the vehicle from dirt and various contaminations: in
fact, each pH acts on different dirt and
contaminations.
PRÌMUS 2.0 Alkaline PH
We start washing using PRÌMUS 2.0 in PreWash
mode, differentiating it:
WINTER
in presence of more dirt
DILUTE 1:30
SUMMER
when the dirt is less
DILUTE 1:50
It can be used as a pre-treatment diluted 1:5 or
1:10 in the areas where the most dirt is deposited,
such as the lower part of the doors,
the lower part of the trunk or for the removal of
midges residues on the front.
PURÌFICA Acid PH
After having carried out the pre-wash, let’s dispense
the PURÌFICA decontaminating shampoo, we will
dispense it in:
FOAM MODE
starting from the bottom up
DILUTE 1:60
PURÌFICA can also be used as a 1:10 diluted pretreatment for those areas most exposed, such as:
the lower part of the doors and the lower rear of the
trunk, to the deposit of minerals such as salt and
water residues as often happens in the winter
season.
SÈMPER Neutral PH
Let’s move on to the mechanical action we are going
to perform with the SÈMPER shampoo.
The product is free from waxes or brightness
enhancers and its super lubricated formula
guarantees extreme smoothness during the
washing phase.
Its foam has been designed to dissolve, incorporate
and hold dirt on the surface of the car in
suspension, removing it in a safe but delicate way.
WASH BUCKET
DILUTE 1:1000
The neutral pH of Sémper will allow not to modify
the decontaminating action started with the
previously dispensing of PURÌFICA favoring a
double function both mechanical and chemical
decontaminating
REVÌTAX • NEUTRAL PH AS
A PROTECTIVE SHAMPOO
To end of the 3pH protection cycle we will
use REVÌTAX , the sealing shampoo with multiple
applications depending on the surfaces and
seasonality.
A new generation “Wash&Coat neutral shampoo
that allows you to wash, seal, protect and prolong
the life of the previously applied coating. On
untreated cars, it manages to give a gloss and
protection, equal to nano sealants, for at least 3
months.
DILUTE 1:100
We will use it in 1:100 dilution and it will be possible
to dispense it in foam mode with subsequent
application using a glove or sponge, in Nebula
pressure pump mode with subsequent application
using a glove or sponge or in bucket mode like a
simple shampoo
WATCH OUR TUTORIAL ON HOW TO WASH, DECONTAMINATE AND KEEP YOUR CAR PROTECTED WITH THE COMBINED 3PH WASH CYCLE
CAR WASH FOR RIMS
“Wheels are a car’s calling card, which is why we have to take care of them in the best possible way.”
A maintenance wash is an essential step when it comes to maintaining a protective product such as wax,
sealant or active nano-ceramic.
Thanks to the different pH of the products used, the #Labocosmetica 3ph combined washing cycle frees
the protective material present on the vehicle from dirt and contamination, in fact, each pH acts on
different dirt and contaminations.
PRÌMUS 2.0 Alkaline PH
To remove all types of organic dirt on rims such as
grease, smog, oil, film, organic waste, its VDA
certification makes it safe on any type of surface.
PRE TREATMENT
DILUTE 1:5 – 1:10
Can be used diluted 1:5 or 1:10 as a pre-treatment in
areas where the most dirt accumulates, such as the
underside of doors, the rear of the lower boot, or to
remove midge marks from the front
PURÌFICA Acid pH
To remove limescale residues and rejuvenate the
wax or sealant coating, it solves the root of the
problem by effectively dissolving and gently
sequestering calcium, deposited mineral deposits
and contamination residues caused by acid rain.
WATCH OUR TUTORIAL ON HOW TO WASH CAR RIMS WITH THE COMBINED 3PH CYCLE BY #LABOCOSMETICA
ENGINE CLEANING
DÙCTILE Alkaline pH
We start washing using PRÌMUS 2.0 in PreWash
mode, differentiating it in the winter season in the
presence of more dirt in a 1:30 dilution while in the
summer season when the dirt is less in a 1:50
dilution. It can be used as a pre-treatment diluted
1:5 or 1:10 in the areas where the most dirt is
deposited, such as the lower part of the doors, the
lower part of the trunk or for the removal of midges
residues on the front.
DECAFLASH SOLVENT
BASE
It is particularly effective for removing stubborn
grease or outdated oil residues from the engine,
thanks to its formula we will have the strength of a
solvent but with the safety of a simple detergent.
A product, DECAFLASH, really simple to use. After
shaking the package, we will spray it on the affected
areas, then it will be possible to work it
mechanically with the help of a medium-soft brush
and when the job is complete, remove the excess
with the aid of steam and a cloth. microfiber.
ÈNERGO ACID pH
It removes heavy limescale and acid rain
contamination which often deposits near or inside
the engine compartment, significantly shortening
decontamination times.
For the removal of mineral residues in the engine
compartment or in those surrounding areas where
water deposits are favored ÈNERGO is the right
product used in a 1:3 dilution.
Dispense the diluted product onto the surface to be
treated using a medium-soft bristle brush as you
work, wait a few minutes for the product to apply
and then remove with steam and a microfiber cloth.
"The watchword is always sweetness: aggression here does not reward. Being delicate and using the right products and accessories is the way to the perfect wash.”
FOLLOW US on our social networks to find out more
Mafra International S.r.L. – Via Aquileia 44/46 – 20021 Baranzate – Milano – Italy – P.iva 09894580969 © 2019 All rights reserved